Tester checks static control performance. Tester indicates whether the resistance is too high or too low in the strap and ground path when the strap is worn.
- Simple testing 3 led indicators.
- Testing range 900KILOHMS - 35MEGOHM According to standard EN61340-5 .
-
Need calibration once in a year
-
Wrist strap circuit (European limits)
-
"high" Fail- factory set at 35M ohms
-
"low" Fail- factory set at 900k ohms
- Accuracy - +/- 5%
- Repeatability - +/- 5%
- Display – LED, 3 stat indicators show: Low, Pass or High result.
- Low battery indicator
- Power supply – 9V battery
- Weight – 4 ounces with battery
- Dimensions – 2.4"W * 4"L * 1"D
- Optional: Wall station only HS-WT200 wallstation foot plate HS-WT300
Operating Instructions:
- while wearing the wrist strap, plug the banana plug end of the cord into the black jack on the top of the tester
- Press the metal test plant
- If the green "PASS" LED light give a "be" – sound, the wrist and grounding cord assemblies are functioning properly.
- If either the " HI-FAIL" OR " lo-fail" LED light, the wrist strap wearer should check the wrist strap assembly immediately.
| Item |
Description |
| HS-WT3000 |
wrist strap and heel/toe strap tester
The Kit includes the tester device, wall Yellow panel, 3 led, stepping metal board |
| HS-WT2000 |
Wrist strap tester
The kit includes the tester device, wall Yellow panel, 3 led | |
|
